FRS prepared and attached, Bassem Sabbagh, please assign this ticket to someone to work on same.

Assigned to Jharna to define the WL .. to be started on 27-10

WL- 4 days

WIP and started on 28-10

CSVs to be shared by today EOD or tomorrow morning

Csv Output has been shared with Integration to upload it in db. Azmat Ali can verify the count in db once uploaded and can check in csv output as well

Jharna Thakur, we have validated the shared XML found some issue are as follows & we have updated one rule regarding site ID, kindly implement the same.

1. / coming in ID, _ should be available in ID
2. Some board Model coming NA, it should ne board type incase of NA
3. Interface index missing in node interface report & its not starting from 1
4. Link type wdm in small
5. Take startRu 1 in nodeshelf
6. NAB9236-TR, NAB9236SM site id not parsing as per rule, Site should be as per below.
PSS_NAB_9236-TR--> NAB9236
PSS_NAB_9236_SM--> NAB9236

Interface missing
ID Unit type Port
128.5.12.31/1/2/14/0/12 S-16.1A C12
128.5.12.31/1/2/14/0/1 XL-64TU L1
128.5.12.31/1/2/14/0/2 XI-64.1 L2
128.5.12.31/1/2/14/0/3 FVOA VA1

wl-0.5 -1 day

WIP and to be delivered by 3-11-2025

xml shared

Jharna Thakur, Please commit the code

code committed

Jharna Thakur, 5 DCM boards are not parsing due shelf missing in Dump, therefore we have changed the rule for shelf index & updated the same, kindly implement.

• Board for which shelf are not available, take the value from column Shelf, & Shelf type would be by default “SHELF-(Shelf Index)”

WL = 0.5 mday

to be started on 10-11

xml shared

Jharna Thakur, Please commit the code

code committed

Jharna Thakur, We have done some changes for Start Ru in FRS & for shelf tye for which cards were not parsing.

Kindly implement the same. Updated FRS attached.

WL :- 0.5 -1 day

WIP and to be delivered by 20-11 the first half

xml shared

Please commit the code

code committed

Jharna Thakur, we have updated rules for startRU index, kindly implement the same, Updated FRS attached

WL- 0.5-1 Day

WIP ... to be delivered on 26-11

xml shared

Now XML is OK, but for some node master self PSS-32 shelf is repeating, please implement the repeating rule for this shelf as per FRS.

WIP for the change and XML to be shared shortly

xml shared

Jharna Thakur Please commit the code

code committed

Bassem Sabbagh, I have updated Nokia_WDM FRS to parse the Lambda detail & attached necessary document. Please assign to someone to work on same.

Assigned to Sandya to define the WL ... To be started on 6-2

WL is 3-4 day.

WIP and started on 9-2 and to be delivered 11-2 EOD

WIP

Work to be resumed on 16-2

WIP and to be delivered by 17-2

WIP and to be delivered by 17-2 EOD

FRS has been updated and the new change should be delivered by 19-2 the first half

WIP...

xml shared.

Sandya Sharma, we have validated the XML & observed some issues, kindly resolve & we have done some changed in FRS as required data classes are not fixed they are varying, update FRS attached, kindly implement.

Lambda Route CSV
1. Need to reverse start & end node for Lambda service if node not matching.
2. Frequency is missing
3. Port not incremented for lambda service

will deliver the xml by tomorrow.

WIP and to be delivered by 24-2 EOD

xml shared.

Sandya Sharma, we have validated the XML, observed some issues, same discussed over call.

1. Not correct port in last hop in Lambda Route Hops, taking 1.
2. Not correct port i last hop in Lambda Service Hops.
3. Port incrementing rule not working for client interfaces in signal flow. not correct port parsing for last hop in lambda routes hop signal flow, taking 1.
4. for lambda 1/OTU2/Djerba/Kebelli:5, taking same node, node should be different

WIP and to be delivered by 25-2 EOD

XML shared.

Sandya Sharma, i have checked the XML & imported the NEP as well observation are as below.

1. Invalid frequency error occurred in NEP, further we analyzed the frequency, its incomplete in dump, we have updated the rule to correct the frequency
2. we have updated the rule to parse OSC & OSCSFP in node interface to rectification of layout, kindly implement the same, earlier it was parsed in board.

Updated FRS attached

WIP and to be shared 3-3 the first half

XML Shared.

Please commit the code

commit done.

Sandya Sharma, As discussed, we need to put Lambda file in separate folder "Lambd_File" under WDM folder

done.